Wood furnaces by Yukon-Eagle

THE YUKON-EAGLE I

Dimensions and Specifications

Eagle 1 Wood & Multifuel Furnaces SpecificationsDimension and Specifications

A B C D E F G H I J

30" 24" 31-1/2" 6" 56" 20" 24" 6" 8" 50-3/4"

Model LWO-112 (Oil)
Input Rating		140,000 BTU
Nozzle		1.0 GPH - 80H
Burner		Wayne Model - MSR
Model LWG-112 (Gas)
Input Rating		140,000 BTU/HR
	Nat		L/P
Orifice	7/32" (.218 dia)		29 (.136 dia)
Manifold Pressure	3.5 WCP		10 WCP
Burner	Wayne Model P250-AF-DI-Y
Model LWO-112 (Oil) or LWG-112(Gas)
Blower Size		10" x10"
Blower CFM		800-1800
Motor Size		1/3 - 1/2 - 3/4 HP
Firebrick Lined		2" Thick
Cast Iron Grates		Yes
Wood Fire Door		11" x 10"
Air Filter		20" x 25" x 1"
Wood Combustion Chamber Size		24" x 16"

NOTE:
It is recommended that a 2", noncombustible, raised pad be used for the furnace. This will prevent moisture from getting under the furnace and causing corrosion.

The YUKON-EAGLE I warm air wood furnace is available with a bolt-on combustion chamber that enables the furnaces to be extensively disassembled to a component weighing no more than 280 lbs. and no larger than 21-1/2" x 30-1/2" x 44-1/2". This extensive disassembly enables you to transport the disassembled unit into difficult to access basement locations for re-assembly and installation. If you plan to install or re-install air conditioning with your new Yukon-Eagle warm air wood furnace, order a unit that includes air conditioning controls. A 1/3 h.p. blower motor is standard equipment. You will want to consider the optional 1/2 h.p. or even 3/4 h.p. motor if you have long heating ductwork runs, an older, drafty house, are on the borderline size-wise between EAGLE I versus EAGLE II but plan to order a EAGLE I, are installing high capacity air conditioning, or some combination of the above.